Plastimo Manual Bilge Pump with Telescopic Handle
Plastimo Manual Bilge Pump with Telescopic Handle - 925 / 25 mm / 1 in / Without By-Pass está agotado y se enviará tan pronto como vuelva a estar disponible.
Plastimo Manual Bilge Pump with Telescopic Handle
Plastimo Manual Bilge Pump with Telescopic Handle - 925 / 25 mm / 1 in / Without By-Pass está agotado y se enviará tan pronto como vuelva a estar disponible.
Water on board? Be ready with the Plastimo Manual Bilge Pump with Telescopic Handle. Designed for efficient, comfortable manual pumping, this compact cockpit bilge pump is built for boaters who want dependable performance, easy access, and smart installation options.
The integrated telescopic handle keeps the pump ready to use when you need it most - no searching for a separate handle in an emergency. Its compact design, 90° outlet position, and 360° rotating nozzles make it easier to install in tight or difficult-access spaces while allowing flexible positioning in relation to the strainer and through-hull fitting.
Available in 925 and 1038 models, with or without a By-Pass connector. The By-Pass version allows a manual pump and an electric centrifugal pump to be combined on the same water circuit.
Important: By-Pass versions are not suitable for electric diaphragm pumps or vane/flexible impeller pumps.
Key Features
- Manual bilge pump with integrated telescopic handle
- Compact cockpit-mounted design for tight spaces
- 90° outlet position for easier installation
- 360° rotating nozzles for flexible hose routing
- Available in 925 and 1038 models
- Available with or without By-Pass connector
- Diaphragm can be removed quickly for cleaning or replacement
- UV-resistant, impact-resistant, and weather-resistant materials
- Designed to blend neatly into modern boat cockpits
Performance & Installation
- Capacity: 40.5 liters/minute according to ISO 15083 testing at 45 strokes per minute with a 10 kPa vacuum
- Flow per cycle: 0.9 L/cycle for 925 models; 1 L/cycle for 1038 models
- 925 hose diameter: 25 mm / 1 in.
- 1038 hose diameter: 38 mm / 1 1/2 in.
- Supplied with: 2 elbow nozzles with valves for suction and discharge
Model Specifications
| Article Number | Model | Flow per Cycle | Hose Diameter | Weight |
|---|---|---|---|---|
| 39539 | Pump 925 without By-Pass | 0.9 L/cycle | 25 mm / 1 in. | 0.920 kg |
| 53058 | Pump 925 with By-Pass | 0.9 L/cycle | 25 mm / 1 in. | 1.050 kg |
| 39541 | Pump 1038 without By-Pass | 1 L/cycle | 38 mm / 1 1/2 in. | 0.920 kg |
| 53059 | Pump 1038 with By-Pass | 1 L/cycle | 38 mm / 1 1/2 in. | 1.050 kg |
Why Choose a Plastimo Manual Bilge Pump?
A manual bilge pump is an important backup for removing water from a boat when electrical systems are not available or when extra pumping power is needed. Plastimo’s 925 and 1038 pumps are designed for dependable onboard use, with easy maintenance, flexible installation, and a handle that stays integrated with the pump.
Why Buy from Bainbridge International Retail?
Bainbridge International is the Official U.S. Distributor of Plastimo. Through Bainbridge International Retail, customers can now shop select Plastimo marine safety, navigation, and water-on-board products direct online.
Frequently Asked Questions
What is this Plastimo bilge pump used for?
This manual bilge pump is used to remove water from a boat’s bilge. It is designed for cockpit installation and provides dependable manual pumping when needed.
Does the pump include a handle?
Yes. The pump features an integrated telescopic handle, so it stays with the pump and is ready to use in an emergency.
What is the difference between the 925 and 1038 models?
The 925 models use a 25 mm / 1 in. hose diameter and provide 0.9 L per cycle. The 1038 models use a 38 mm / 1 1/2 in. hose diameter and provide 1 L per cycle.
What does the By-Pass version do?
The By-Pass version allows a manual bilge pump and an electric centrifugal pump to be combined on the same water circuit.
Can the By-Pass version be used with any electric pump?
No. The By-Pass version is intended for use with an electric centrifugal pump. It is not suitable for electric diaphragm pumps or vane/flexible impeller pumps.
What is the pumping capacity?
The pump has a capacity of 40.5 liters per minute according to ISO 15083 testing at 45 strokes per minute with a 10 kPa vacuum.
Is this pump easy to install in tight spaces?
Yes. The compact body, 90° outlet position, and 360° rotating nozzles help the pump fit into cramped or hard-to-reach locations.
Is the pump easy to maintain?
Yes. The diaphragm can be removed without taking out the entire pump, making it easier to clean the pump body or replace the diaphragm if needed.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
